Crosby G-2150 Bolt Type Shackle
- Brand: Crosby
- Estimated lead time to dispatch is Same Day Before 1pm
-
£8.10
Crosby G-2150 Bolt Type Shackle
- Capacities 1/2 thru 85 metric tons, grade 6.
- Working Load Limit and grade 6 permanently shown on every shackle.
- Forged - Quenched and Tempered, with alloy pins. Hot Dip galvanised or self coloured. (85, 120, and 150-metric ton shackles are all hot dip galvanised bows and the bolts are Dimetcoted® and painted red)
- Fatigue rated (1/2t - 55t) Shackles 25t and larger are RFID EQUIPPED.
- Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F).
- Meets or exceeds all requirements of ASME B30.26. Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
- Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
- Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
- All 2150 shackles can meet charpy requirements of 42 joules (31 ft-lbs) avg at -20 degree C (-4 degrees F) upon special request.
- Look for the Red Pin® . . . the mark of genuine Crosby quality.
Nominal Shackle Size (inch) | Working Load Limit (t*) | Weight (kg) | Tolerance +/- (G) (mm) | Tolerance +/- (A) (mm) |
1/4 | 1/2 | 0.6 | 1.50 | 1.50 |
5/16 | 3/4 | 0.10 | 1.50 | 1.50 |
3/8 | 1 | 0.15 | 3.30 | 1.50 |
7/16 | 1-1/2 | 0.22 | 3.30 | 1.50 |
1/2 | 2 | 0.34 | 3.30 | 1.50 |
5/8 | 3-1/4 | 0.67 | 3.30 | 1.50 |
3/4 | 4-3/4 | 1.14 | 6.35 | 1.50 |
7/8 | 6-1/2 | 1.74 | 6.35 | 1.50 |
1 | 8-1/2 | 2.52 | 6.35 | 1.50 |
1-1/8 | 9-1/2 | 3.45 | 6.35 | 1.50 |
1-1/4 | 12 | 4.90 | 6.35 | 1.50 |
1-3/8 | 13-1/2 | 6.24 | 6.35 | 3.30 |
1-1/2 | 17 | 8.39 | 6.35 | 3.30 |
1-3/4 | 25 | 14.2 | 6.35 | 3.30 |
2 | 35 | 21.2 | 6.35 | 3.30 |
2-1/2 | 55 | 38.6 | 6.35 | 6.35 |
3 | 85 | 56 | 6.35 | 6.3 |
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94. † Individually Proof Tested with certi cation. ‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.
Nominal Shackle Size (inch) | Working Load Limit (t*) | Weight (kg) | Tolerance +/- (G) (mm) | Tolerance +/- (A) (mm) |
1/4 | 1/2 | 0.6 | 1.50 | 1.50 |
5/16 | 3/4 | 0.10 | 1.50 | 1.50 |
3/8 | 1 | 0.15 | 3.30 | 1.50 |
7/16 | 1-1/2 | 0.22 | 3.30 | 1.50 |
1/2 | 2 | 0.34 | 3.30 | 1.50 |
5/8 | 3-1/4 | 0.67 | 3.30 | 1.50 |
3/4 | 4-3/4 | 1.14 | 6.35 | 1.50 |
7/8 | 6-1/2 | 1.74 | 6.35 | 1.50 |
1 | 8-1/2 | 2.52 | 6.35 | 1.50 |
1-1/8 | 9-1/2 | 3.45 | 6.35 | 1.50 |
1-1/4 | 12 | 4.90 | 6.35 | 1.50 |
1-3/8 | 13-1/2 | 6.24 | 6.35 | 3.30 |
1-1/2 | 17 | 8.39 | 6.35 | 3.30 |
1-3/4 | 25 | 14.2 | 6.35 | 3.30 |
2 | 35 | 21.2 | 6.35 | 3.30 |
2-1/2 | 55 | 38.6 | 6.35 | 6.35 |
3 | 85 | 56 | 6.35 | 6.3 |
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94. † Individually Proof Tested with certi cation. ‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.
Nominal Shackle Size (inch) | A (mm) | B (mm) | D (mm) | F (mm) | G (mm) | K (mm) | M (mm) | P (mm) | R (mm) |
1/4 | 11.9 | 7.85 | 6.35 | 15.5 | 19.1 | 40.4 | 24.6 | 39.6 | 6.35 |
5/16 | 13.5 | 9.65 | 7.85 | 19.1 | 25.4 | 48.5 | 29.5 | 46.2 | 7.85 |
3/8 | 16.8 | 11.2 | 9.65 | 23.1 | 31 | 58.5 | 35.8 | 55 | 9.65 |
7/16 | 19.1 | 12.7 | 11.2 | 26.9 | 36.1 | 67.5 | 41.1 | 63.5 | 11.2 |
1/2 | 20.6 | 16 | 12.7 | 30.2 | 41.4 | 77 | 46 | 71 | 12.7 |
5/8 | 26.9 | 19.1 | 16 | 38.1 | 51 | 95.5 | 58.5 | 89.5 | 16 |
3/4 | 31.8 | 22.4 | 19.1 | 46 | 60.5 | 115 | 70 | 103 | 20.6 |
7/8 | 36.6 | 25.4 | 22.4 | 53 | 71.5 | 135 | 81 | 120 | 24.6 |
1 | 42.9 | 28.7 | 25.4 | 60.5 | 81 | 151 | 93.5 | 135 | 25.4 |
1-1/8 | 46 | 31.8 | 28.7 | 68.5 | 91 | 172 | 103 | 150 | 31.8 |
1-1/4 | 51.5 | 35.1 | 31.8 | 76 | 100 | 191 | 115 | 165 | 35.1 |
1-3/8 | 57 | 38.1 | 35.1 | 84 | 111 | 210 | 127 | 183 | 38.1 |
1-1/2 | 60.5 | 41.4 | 38.1 | 92 | 122 | 230 | 137 | 196 | 41.1 |
1-3/4 | 73 | 51 | 44.5 | 106 | 146 | 279 | 162 | 230 | 54 |
2 | 82.5 | 57 | 51 | 122 | 172 | 312 | 184 | 264 | 60 |
2-1/2 | 105 | 70 | 66.5 | 145 | 203 | 377 | 238 | 344 | 66.5 |
3 | 127 | 82.5 | 76 | 165 | 216 | 429 | 279 | 419 | 89 |