THK 'Thin Sheet' Horizontal Plate Clamps
THK Horizontal Plate Clamps
The THK horizontal plate clamps share the same basic design features as the CH range of clamps but have a reversed tooth jaw design. This safety feature is designed for use with thin sheets which may have a tendency to deflect or sag or flex. Suited to thin plate with a surface hardness less than 300 Brinell/32 Rockwell C.
Model | WLL kg* | Jaw capacity mm | Weight kg** |
THK 750 | 40 - 750 | 0 - 25 | 3 |
THK 1500 | 75 - 1500 | 0 - 35 | 6 |
THK 3000 | 150 - 3000 | 0 - 35 | 11 |
THK 4500 | 250 - 4500 | 0 - 45 | 16 |
THK 6000 | 300 - 6000 | 0 - 60 | 23 |
THK 9000 | 450 - 9000 | 0 - 60 | 35 |
Model | WLL kg* | Jaw capacity mm | Weight kg** |
THK 750 | 40 - 750 | 0 - 25 | 3 |
THK 1500 | 75 - 1500 | 0 - 35 | 6 |
THK 3000 | 150 - 3000 | 0 - 35 | 11 |
THK 4500 | 250 - 4500 | 0 - 45 | 16 |
THK 6000 | 300 - 6000 | 0 - 60 | 23 |
THK 9000 | 450 - 9000 | 0 - 60 | 35 |