TTT Horizontal Girder Clamps Split Toe Plate
TTT Horizontal Girder Clamps Split Toe Plate
The TTT horizontal girder clamps have been designed to be used in pairs and can be used on girders up to a surface hardness of HRC 30/Brinell 300.
The unique design of the split toe allows long sections of girders to be lifted with out the use of a spreader beam. This is achieved by using a pair of clamps with a 2-legged chain sling.
Model | WLL (kg) | Jaw capacity (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | Weight (kg) |
TTT 0.75 | 750 | 0 - 20 | 225 | 142 | 70 | 45 | 70 | 106 | 16 | 16 | 3 |
TTT 1.5 | 1500 | 0 - 35 | 225 | 180 | 80 | 56 | 70 | 120 | 19 | 20 | 6 |
TTT 3.0 | 3000 | 0 - 40 | 225 | 195 | 84 | 60 | 75 | 125 | 19 | 25 | 10 |
TTT 4.5 | 4500 | 0 - 45 | 225 | 222 | 105 | 65 | 90 | 147 | 22 | 30 | 16 |
Model | WLL (kg) | Jaw capacity (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | A (mm) | Weight (kg) |
TTT 0.75 | 750 | 0 - 20 | 225 | 142 | 70 | 45 | 70 | 106 | 16 | 16 | 3 |
TTT 1.5 | 1500 | 0 - 35 | 225 | 180 | 80 | 56 | 70 | 120 | 19 | 20 | 6 |
TTT 3.0 | 3000 | 0 - 40 | 225 | 195 | 84 | 60 | 75 | 125 | 19 | 25 | 10 |
TTT 4.5 | 4500 | 0 - 45 | 225 | 222 | 105 | 65 | 90 | 147 | 22 | 30 | 16 |