William Hackett Yoke Swivel Hoist Ring with Alloy Steel Washer - 204
- Rotates through 360° and pivots 180°, rated at 100% at 90° angle.
- Manufactured from alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN1677-1.
- Load rated parts forged are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread (ASME / ANSI B18.3.1M).
- Proof tested to 2.5 times the WLL. on the 4:1 factor.
- Fatigue rated to 1.5 times the WLL.
- Design Factor 4:1.
- All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required.
- heavy duty flexible attachment points.
- Mold and die handling.
- Pump and valve handling
| Part Code | WLL lbs | Torque Ft- lbs | Bolt Size | Box Quantity | Mass (kg) |
| 8-204-004 | 800 | 7 | 5/16 | 30 | 0.40 |
| 8-204-005 | 1000 | 12 | 3/8 | 30 | 0.50 |
| 8-204-010 | 2500 | 28 | 1/2 | 12 | 1.70 |
| 8-204-019 | 4000 | 60 | 5/8 | 12 | 1.80 |
| 8-204-021 | 5000 | 100 | 3/4 | 12 | 1.90 |
| 8-204-042 | 8000 | 160 | 7/8 | 6 | 4.20 |
| 8-204-045 | 10000 | 230 | 1 | 3 | 6.70 |
| 8-204-070 | 15000 | 470 | 1-1/4 | 3 | 15.50 |
| 8-204-125 | 24000 | 800 | 1-1/2 | 1 | 16.50 |
| 8-204-135 | 30000 | 1100 | 2 | 1 | 16.80 |
DIMENSIONAL SPECIFICATION
| WLL tonnes | Thread M (mm) | Thread M (mm) | A (mm) |
B (mm) | D (mm) | E (mm) | F (mm) | G (mm) | Torque Nm | Mass (lbs) |
| 800 | 5/16 | 18 UNC | 1.57 | 1.61 | 0.35 | 0.71 | 4.02 | 2.56 | 7 | 0.9 |
| 1000 | 3/8 | 16 UNC | 1.57 | 1.61 | 0.35 | 0.71 | 4.02 | 2.56 | 12 | 0.9 |
| 2500 | 1/2 | 13 UNC | 2.56 | 2.32 | 0.59 | 0.75 | 6.26 | 4.13 | 28 | 3.7 |
| 4000 | 5/8 | 11 UNC | 2.56 | 2.32 | 0.59 | 0.74 | 6.36 | 4.13 | 60 | 4.0 |
| 5000 | 3/4 | 10 UNC | 2.56 | 2.87 | 0.59 | 1.24 | 6.26 | 4.13 | 100 | 4.0 |
| 8000 | 7/8 | 9 UNC | 3.35 | 2.87 | 0.87 | 1.43 | 8.03 | 5.28 | 160 | 9.3 |
| 10000 | 1 | 8 UNC | 3.35 | 2.87 | 0.87 | 1.36 | 8.03 | 5.28 | 230 | 9.5 |
| 15000 | 1-1/4 | 7 UNC | 3.95 | 3.15 | 1.00 | 2.25 | 8.58 | 6.30 | 470 | 14.5 |
| 24000 | 1-1/2 | 6 UNC | 4.72 | 4.29 | 1.38 | 2.17 | 12.09 | 8.66 | 800 | 35.2 |
| 30000 | 2 | 4.5 UNC | 4.72 | 4.29 | 1.38 | 3.01 | 12.09 | 8.66 | 1100 | 35.2 |
LIFTING POINT WORKING LOAD APPLICATION FACTORS
|
|
|
|
|
|
|
|
|
|||
| Number of legs | 1 | 2 | 1 | 2 | 2 | 2 | 3-4 | 3-4 | ||
| Load direction | 0° | 0° | 90° | 90° | 0-45° | 45-60° | unsymm. | 0-45° | 45-60° | unsymm. |
| Thread | WLL tonnes | |||||||||
| 5/16" | 0.36 | 0.72 | 0.36 | 0.72 | 0.504 | 0.36 | 0.36 | 0.756 | 0.54 | 0.36 |
| 3/8" | 0.45 | 0.9 | 0.45 | 0.9 | 0.63 | 0.45 | 0.45 | 0.945 | 0.675 | 0.45 |
| 1/2" | 1.1 | 2.2 | 1.1 | 2.2 | 1.54 | 1.1 | 1.1 | 2.31 | 1.65 | 1.1 |
| 5/8" | 1.8 | 3.6 | 1.8 | 3.6 | 2.52 | 1.8 | 1.8 | 3.78 | 2.7 | 1.8 |
| 3/4" | 2.2 | 4.4 | 2.2 | 4.4 | 3.08 | 2.2 | 2.2 | 4.62 | 3.3 | 2.2 |
| 7/8" | 3.6 | 7.2 | 3.6 | 7.2 | 5.04 | 3.6 | 3.6 | 7.56 | 5.4 | 3.6 |
| 1" | 4.5 | 9 | 4.5 | 9 | 6.3 | 4.5 | 4.5 | 9.45 | 6.75 | 4.5 |
| 1-1/4" | 6.8 | 13.6 | 6.8 | 13.6 | 9.52 | 6.8 | 6.8 | 14.28 | 10.2 | 6.8 |
| 1-1/2" | 10.9 | 21.8 | 10.9 | 21.8 | 15.26 | 10.9 | 10.9 | 22.89 | 16.35 | 10.9 |
| 2" | 13.6 | 27.2 | 13.6 | 27.2 | 19.04 | 13.6 | 13.6 | 28.56 | 20.4 | 13.6 |
