The Britlift T34 Modular Spreader Beam is a configurable lifting solution designed for safe and efficient load distribution across professional lifting and rigging applications.
Manufactured in the UK, the T34 system uses interchangeable struts to create a range of span configurations, helping reduce the need for multiple fixed-length beams.
| 45° STV | 30° STV | 20° STV | ||||
| SPAN | SWL IN TONNES | MINIMUM TOP SLING LENGTH REQUIRED (METERS) | SWL IN TONNES | MINIMUM TOP SLING LENGTH REQUIRED (METERS) | SWL IN TONNES | MINIMUM TOP SLING LENGTH REQUIRED (METERS) |
| 1 | 34 | 0.5 | 34 | 0.8 | 34 | 1.3 |
| 1.5 | 34 | 0.9 | 34 | 1.3 | 34 | 2 |
| 2 | 34 | 1.2 | 34 | 1.8 | 34 | 2.7 |
| 2.5 | 34 | 1.6 | 34 | 2.3 | 34 | 3.5 |
| 3 | 34 | 1.9 | 34 | 2.8 | 34 | 4.2 |
| 3.5 | 34 | 2.3 | 34 | 3.3 | 34 | 4.9 |
| 4 | 34 | 2.6 | 34 | 3.8 | 34 | 5.7 |
| 4.5 | 34 | 3 | 34 | 4.3 | 34 | 6.4 |
| 5 | 29 | 3.3 | 34 | 4.8 | 34 | 7.1 |
| 5.5 | 25 | 3.7 | 34 | 5.3 | 34 | 7.8 |
| 6 | 21 | 4 | 34 | 5.8 | 34 | 8.6 |
| 6.5 | 18 | 4.4 | 32 | 6.3 | 34 | 9.3 |
| 7 | 16 | 4.7 | 28 | 6.8 | 34 | 10 |
| 7.5 | 14 | 5.1 | 24 | 7.3 | 34 | 10.8 |
| 8 | 12 | 5.5 | 21 | 7.8 | 34 | 11.5 |
| 8.5 | 10 | 5.8 | 18 | 8.3 | 30 | 12.2 |
| 9 | 9 | 6.2 | 16 | 8.8 | 26 | 13 |
| 9.5 | 8 | 6.5 | 14 | 9.3 | 22 | 13.7 |
| 10 | 7 | 6.9 | 13 | 9.8 | 20 | 14.4 |
THIS IS A SPREADER BEAM AND MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS
- THIS IS A SPREADER BEAM AND MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS.
- STV (SLING TO VERTICAL) ANGLE MUST BE NO MORE THAN 45°.
- CHART 1 MUST BE REFERRED TO IN ORDER TO ENSURE THAT THIS BEAM IS SUITABLE FOR THE PLANNED LIFT.
- END LINKS MUST HANG DOWNWARDS, TOWARDS THE LOAD.
- THE WLL (WORKING LOAD LIMIT) OF A SINGLE LINK PLATE IS 17 TONNES (34 TONNES COMBINED). DO NOT EXCEED THIS WEIGHT AT ONE END OF THE BEAM.
- THE T34 USES M20 x 50 GRADE 8.8 HT BOLTS, NUTS AND WASHERS. THE RECOMMENDED TIGHTENING TORQUE IS 160Nm.
- ANY PERSONNEL USING THIS PRODUCT MUST BE A TRAINED AND COMPETANT RIGGER OR SLINGER/SIGNALLER.
- THE ONGOING USE OF THIS PRODUCT MUST BE IN ACCORDANCE WITH THE REQUIRMENTS IN LOLER (LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998).
- PLEASE ENSURE THAT NO MORE THAN 7 COMPONENTS ARE USED IN THE ASSEMBLY OF A BEAM (INCLUDING END PIECES).
- CHECK THAT NO RIGGING EQUIPMENT CLASHES WITH THE BEAM. THE BEAM MUST ONLY BE LOADED THROUGH THE SHACKLE PIN HOLES AT EACH END.
On-Site Inspections & Repairs
LOLER examinations, testing and expert maintenance to keep your equipment safe, compliant and working hard.
Bespoke Design & Manufacture
Custom lifting beams, frames and assemblies engineered for your unique load and site needs.
Testing & Maintenance Available
Keep your equipment performing at its best with our expert servicing and maintenance options.
Fast, Certified Hire
Get site-ready lifting gear delivered next day across London and the South East.
