The Britlift T24 Modular Spreader Beam is a configurable lifting solution designed for safe and efficient load distribution across professional lifting and rigging applications.
Manufactured in the UK, the T24 system uses interchangeable struts to create a range of span configurations, helping reduce the need for multiple fixed-length beams.
| 45° STV | 30° STV | 20° STV | ||||
| SPAN | SWL IN TONNES | MINIMUM TOP SLING LENGTH REQUIRED (METERS) | SWL IN TONNES | MINIMUM TOP SLING LENGTH REQUIRED (METERS) | SWL IN TONNES | MINIMUM TOP SLING LENGTH REQUIRED (METERS) |
| 1 | 24 | 0.6 | 24 | 0.9 | 24 | 1.3 |
| 1.5 | 24 | 0.9 | 24 | 1.4 | 24 | 2.1 |
| 2 | 24 | 1.3 | 24 | 1.9 | 24 | 2.8 |
| 2.5 | 24 | 1.7 | 24 | 2.4 | 24 | 3.5 |
| 3 | 24 | 2.0 | 24 | 2.9 | 24 | 4.3 |
| 3.5 | 24 | 2.4 | 24 | 3.4 | 24 | 5.0 |
| 4 | 24 | 2.7 | 24 | 3.9 | 24 | 5.7 |
| 4.5 | 20 | 3.1 | 24 | 4.4 | 24 | 6.5 |
| 5 | 17 | 3.4 | 24 | 4.9 | 24 | 7.2 |
| 5.5 | 14 | 3.8 | 24 | 5.4 | 24 | 7.9 |
| 6 | 11 | 4.1 | 20 | 5.9 | 24 | 8.7 |
| 6.5 | 10 | 4.5 | 17 | 6.4 | 24 | 9.4 |
| 7 | 8 | 4.8 | 14 | 6.9 | 23 | 10.1 |
| 7.5 | 7 | 5.2 | 12 | 7.4 | 20 | 10.8 |
| 8 | 6 | 5.5 | 11 | 7.9 | 17 | 11.6 |
THIS IS A SPREADER BEAM AND MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS
- THIS IS A SPREADER BEAM AND MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS.
- STV (SLING TO VERTICAL) ANGLE MUST BE NO MORE THAN 45°.
- CHART 1 MUST BE REFERRED TO IN ORDER TO ENSURE THAT THIS BEAM IS SUITABLE FOR THE PLANNED LIFT.
- END LINKS MUST HANG DOWNWARDS, TOWARDS THE LOAD.
- THE WLL (WORKING LOAD LIMIT) OF A SINGLE LINK PLATE IS 12 TONNES (24 TONNES COMBINED). DO NOT EXCEED THIS WEIGHT AT ONE END OF THE BEAM.
- THE T24 USES M20 x 50 GRADE 8.8 HT BOLTS, NUTS AND WASHERS. THE RECOMMENDED TIGHTENING TORQUE IS 160Nm.
- ANY PERSONNEL USING THIS PRODUCT MUST BE A TRAINED AND COMPETANT RIGGER OR SLINGER/SIGNALLER.
- THE ONGOING USE OF THIS PRODUCT MUST BE IN ACCORDANCE WITH THE REQUIRMENTS IN LOLER (LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998).
- PLEASE ENSURE THAT NO MORE THAN 7 COMPONENTS ARE USED IN THE ASSEMBLY OF A BEAM (INCLUDING END PIECES).
- CHECK THAT NO RIGGING EQUIPMENT CLASHES WITH THE BEAM. THE BEAM MUST ONLY BE LOADED THROUGH THE SHACKL
On-Site Inspections & Repairs
LOLER examinations, testing and expert maintenance to keep your equipment safe, compliant and working hard.
Bespoke Design & Manufacture
Custom lifting beams, frames and assemblies engineered for your unique load and site needs.
Testing & Maintenance Available
Keep your equipment performing at its best with our expert servicing and maintenance options.
Fast, Certified Hire
Get site-ready lifting gear delivered next day across London and the South East.
